While it's not advised to reduce a plant on your own, if you're going to continue, the initial point you must do is assess the threat of the tree dropping on anything other than the ground. You certainly do not desire to cut the plant simply to have it drop on your residence, fencing, or worse ... a next-door neighbor's home. As soon as you are prepared to go, you can begin complying with these steps to securely reduce down your plant.
1. Determine exactly how high the plant is.
2. Based upon the height of the plant, choose on the direction you really want the tree to fall.
3. Clear the area in the fall-zone from any kind of debris or anything that could be damaged.
4. Link one end of the rope to the plant at either the center or above the center.
5. Hand the other end off to your good friends and have them stand outside of the fall-zone at a safe range.
6. Cut a v-shaped degree into the plant on the side you want the plant to drop.
7. The notch ought to go to approximately knee-height, ought to reduce to the center of the tree and must appear like a shallow "v".
8. Move to the opposite of the tree and begin slowly cutting into the tree till you meet your notch cut.
9. When the tree begins to drop, rapidly bow out the plant at a 45 level angle.
10. If the plant doesn't trip all the method or obtains recorded on an additional plant, have your good friends start drawing on the rope up until the tree ultimately falls.
Stump Grinder Castle Hill